|Zhaofengxiang Building, No. 8, Liye Road, Dongfang Community, Songgang Street, Baoan District, Shenzhen, Chinafirstname.lastname@example.org|
Payment & Shipping Terms:
|Nominal Voltage:||3.7V||Charge Current:||0.2C/0.5C/1.0C|
|Cycle Life:||Over 500 Times||Soft Pack Weight:||About 62.0g|
|Warranty:||1 Year||Application:||Electronic Device|
lipo polymer battery,
lithium lipo battery
1 Year Warranty 835063 3.7V 3600mAh Lithium Polymer Battery for Medical Equipment, Beauty Equipment
Li-polymer Battery Features
1, High energy density
2, High working voltage for single battery cells
4, Long cycle life
5, No memory effect
6, Capacity, resistance, Voltage, platform time consistency is good
7, With short-circuit production function, safe and reliable
8, Factory price & High quality
9, Good consistency, low self discharge
10, Light weight, small size
1) One year warranty, fast delivery after payment down
2) Rapid replacement of defective until you are satisfied
3) Reply you within 6 hours, not over 24 hours
|1.||Battery Cell Model||835063|
|6.||Cycle life||≥500 times|
|9.||Standard Disharge Current||0.2C|
|10.||Standard Charge Current||0.2C|
|11.||Max Continuous Discharge Current||1C|
|12.||Fast Charge Current||1C|
|13.||Reference Over Discharge Cut Off Voltage||3.0V|
|16.||Discharge Working Temperature||-20-60°C|
|17.||Charge Working Temperature||0-45°C|
|18.||Recommended Storage Temperature||23 ± 5°C|
1. Lithium Polymer Battery Precautions and Safety Instructions
(1) Guarantee to keep the battery in good repair in 12 months from the shipment.
(2) Please use 0.5C current to charge up 60% capacity after the battery placed 3 months.
(3) Before Use the battery, carefully read the instruction manual and battery labels on the surface.
(4) Need to use the original battery charger, and should be placed in a dry ventilated place.
(5) Such as long-term when not in use, the battery charger to charge state half full, remove the battery from the device and separated, to avoid metal contact with the battery, causing
short-circuit or damage to the phenomenon.
(6) In use or during storage, battery found there has been high fever, leakage, odor, distortion and other anomalies, please stop using it immediately and stay away from the battery.
(7) Do not short-circuit the battery positive and negative, and careful not to allow the battery to moisture, to avoid danger.
(8) Using, keep away from heat, High pressure place, and do not beat, hit the battery.
(9) Battery end of life should be immediately removed from the equipment, Please properly handle security of spent batteries, do not put into fire or water.
(10) Shocks, high temperature, or contacts of sharp edge components should not be allowed in battery pack assembling process.
2.Storage of Lithium Polymer Battery
(1) Batteries should be charged to about 30% to 50% of capacity.
(2) Indoor storage in cool conditions without direct sun light on the packs or cartons.
(3) Store batteries in a dry location with low humidity, and a temperature range of –20°C to +30°C.
(4) Long-term storage can accelerate batteries self-discharge and lead to the deactivation of the batteries.To minimize the deactivation effect,store batteries in atemperature range of +10°C to +30°C.
(5) When charging for the first time after long-term storage,deactivation of batteries may have led to decreased capacity.Recover such batteries to original performance through repeating several cycles of fully charging and discharging.
(6) When storing batteries for more than 6 months,charge at least once every 6 months to prevent leakage and deterioration in performance due to self-discharging.